                                                            Net Vision Co., Ltd.
                                                                   Feb 20, 2026
About the SVL-03-GEN Full Package

Thank you for purchasing our SVL-03-GEN.
This document explains the contents of the SVL-03-GEN Full Package.
The SVL-03-GEN is a board developed as the successor to the SVO-03-MIPI.

1. About the Full Package
    This package contains the software and documentation required to use the SVL-03-GEN board.
    The contents are as follows:

    \Appl_x64                           Stores the 64-bit application for controlling the SVL-03-GEN board.
    \Data                               Stores sample video data.
    \Doc                                Stores various documents.
    \Driver_x64                         Stores the device drivers for the SVO board.
    \FW_FPGA                            Stores firmware and update images for FPGA and CrossLink configurations.
    \Runtime                            Stores Microsoft-provided runtime components required to run NVFilePlayer.
    \Tool                               Stores the FRM file converter utility.
    \Timing                             Stores sample EDID and timing files used in DisplayPort mode.
    \History_jp.txt                     Describes version update information (Japanese).
    \History_en.txt                     English version
    \Readme_jp.txt                      JP Version.
    \Readme_en.txt                      This document.
    \Software_License_Agreement_jp.pdf  Software and documentation license agreement (Japanese).
    \Software_License_Agreement_en.pdf  English version of the above license agreement.

2. Installing the Device Driver for the SVL-03-GEN Board
    When using the product for the first time, you must install the device driver located in the Driver_x64 folder.
    For installation instructions, please refer to “Device Driver Installation Method” in the Doc folder.

3. Installing the Application
    1) The application is stored in the Appl_x64 folder.
       Copy all contents of this folder to an appropriate directory on your hard disk.
       Supported Windows versions: Windows 10 and Windows 11.
    2) Instructions for using the application are provided in the Doc folder.
       This CD currently supports 64-bit operating systems only.

4. Notes and Precautions
    1) Firmware/FPGA updates can be performed using the supplied update software (SVMUpdater).
    2) When connecting or disconnecting the target, be sure to turn off the power to the SVL-03-GEN board.
       Disconnect the USB 3.2 cable.
    3) For power supply to this board, carefully read the SVL-03-GEN hardware specification and use a power supply with sufficient current capacity.
       Supplying power from a PC is done at the user’s own risk.
       We assume no responsibility for any damage to the PC.

5. Support
    Email:
    sv-support@net-vision.co.jp

    Web:
    https://www.net-vision.co.jp/contact/