                                                                            NetVision Corp.
                                                                            January 05, 2026
- About Software CD-ROM of SVO-03-MIPI

This document describes the Software CD-ROM and how to install applications.

1. About Software CD-ROM
 This CD-ROM contains some sortwares and documents to use SVO-03-MIPI.
 The contents of CD-ROM are as follows:

@/Data folder         ... Contains the sample video data used in USB mode.
  /Doc folder          ... Contains the documents such as software manual or hardware manual.
  /Driver_HDMI folder  ... Contains the device driver for HDMI/Updater mode.
  /Driver_USB folder   ... Contains the device driver for USB mode.
  /FW_FPGA folder      ... Contasins the update images of firmware and FPGA.
  /SVO-AP_x64 folder   ... Contains the SVO application softwares for 64bit OS.
  /Timing folder       ... Contains the EDID and timing data.
  /Tool folder         ... Contains the FRM file converter utility.
  Software License Agreement.pdf   ... The license agreement for softwares and materials in CD-ROM.
  History.txt         ... The document that describes the contents of the version upgrade.      
  Readme_en.txt       ... This file.

2. How to Install Device Driver for SVO-03-MIPI.
 [1] Connect SVO-03-MIPI and PC via a USB3.0 cable to turn on the power of SVO-03-MIPI.
 [2] The OS would request to install the device driver, then set the CD-ROM into your CD-ROM drive.
    The driver is in "Driver_HDMI" and "Driver_USB" folder in the CD-ROM.
  
    When you use it in HDMI/Updater mode, open Driver_HDMI folder to install.
    When you use it in  USB mode, open Driver_USB folder to install.

3. How to install application runtimes
    When using our product for the first time, you must install the application runtime.
    Please run dotnet-sdk...exe and VC_redist...exe located in the Runtime folder, respectively. 
    After installation completes, run the application.


4. How to Install Applications
 [1] The applications are contained in "SVO-AP_x64" folder in the CD-ROM. 
    Copy all the contents of one of the folder above suitable for your OS into your PC.

 [2] Please refer to the software manuals in Doc folder in the CD-ROM for the usage of the application.


5. Download for the latest update images
  You can download the latest firmware and FPGA update images from our website.
@@https://www.net-vision.co.jp/sv-english/download_en.html

6. Support
  Please contact us at the e-mail address below if you need support.
    sv-support@net-vision.co.jp