SVL‑06 Board with MIPI 10Gbps Input and USB 10Gbps Output
Next‑Generation Flagship Product: SVL‑06 Board
■SVL‑06 Board Overview
The SVL-06 adopts the Artix™ UltraScale+ (XCAU10P 1FFVB676E) and EZ-USB™ FX10, providing enhanced functionality compared to our previous products.
- MIPI D-PHY : 1.5Gbps/Lane → 2.5Gbps/Lane
- Video Capture Bandwidth : 4K@30fps → 4K@60fps
- On‑Board Memory : DDR3(12.8Gbps) → DDR4(32Gbps)
- Low Power Consumption and Low Heat Generation
*The display connector has been replaced with a SAMTEC 120pin connector. By attaching an optional daughter board, it can support interfaces such as DisplayPort and 10GbE.
■Block Diagram
SVL‑06‑UVC Pre‑Release
■MIPI Input / UVC Output
The SVL‑06‑UVC can capture 4K@60fps video and display it at full rate. It also supports capturing video with bandwidth equivalent to 8K.
Although some functions—such as clock output to the target—are still limited, most standard features have already been implemented and are operating stably. Therefore, we will proceed with a pre‑release.
■MIPI Input / DisplayPort Output
Support through an optional board is planned, with release scheduled for the first half of 2027.
■MIPI Input / 10GbE Output
Support through an optional board is planned. Please contact us if needed.
SVL‑06‑UVC Optional Features
■Simultaneous capture of asynchronous multi-camera/multi-virtual-channel sources
With our previous boards, capturing multiple channels asynchronously required using multiple boards—one per channel. Even in synchronous configurations, it was only possible when the video streams were strictly line interleaved or frame interleaved.
The SVL‑06‑UVC can capture frames even when each channel outputs asynchronously. The example below shows multiple cameras connected to the SVL‑06‑UVC and a deserializer board, with all channels captured and displayed simultaneously.
■Lead Time and Optional Feature Details
- SVL‑06‑UVC (Pre‑Release Version)
- Lead Time: One week after order
- Optional Feature (Multi‑Camera / Multi‑Virtual‑Channel Configuration)
- The configuration fee applies to each additional channel.
- Once configured, any changes of setup including restoration to the standard specification cannot be supported.
- Providing the expected specifications and conditions in advance is required to prepare a quotation.
If you have any questions, please feel free to contact us.
